服务热线: (408) 520-1656
 
 
       Consultation News
News        Consultation
Concept: Green building, refers to a structure and using process that is environmentally responsible and resource-efficient throughout a building's life-cycle: from siting to design, construction, operation, maintenance, renovation, and demolition. In other words, green building design involves finding the balance between homebuilding and the sustainable environment. Significance: Green building is a trend of architecture development. For developers, green building assessment is able to promote the image of enterprise and increase the occupancy rate and commercial returns. At present, those i...
发布时间: 2014 - 12 - 14
浏览次数:59
Major Contents: (1)Formaldehyde Concentration Inspection;(2)Ammonia Concentration Inspection;(3)Benzene Concentration Inspection;(4)Radon Concentration Inspection;(5)TVOC Concentration Inspection. Pollutants Civil ArchitectureⅠ Civil ArchitectureⅡ Formaldehyde(mg/m3) ≤0.08 ≤0.10 Benzene(mg/m3) ≤0.09 ≤0.09 Ammonia(mg/m3) ≤0.2 ≤0.2 TVOC(mg/m3) ≤0.5 ≤0.6 Radon(Bq/m3) ≤200 ≤400 Significance: Indoor environment Inspection aims to accurately and fully reflect the indoor environment quality performance and developing trend in time, providing scientific evidence for indoor environment management, poll...
发布时间: 2014 - 12 - 14
浏览次数:34
Concept: Building Information Modeling, short for BIM, is a digital representation of physical and functional characteristics of a facility. A BIM is a shared knowledge resource for information about a facility forming a reliable basis for decisions during its life-cycle, defined as existing from earliest conception to demolition. Integrating the information of project through parametric model, sharing and transmitting during the life-cycle of project planning, operation and maintenance makes engineers master the information of building and react efficiently. In addition, it provides a foundat...
发布时间: 2014 - 12 - 14
浏览次数:68
Concept:  Energy Saving Modification of existing building refers to making modification plans for original building envelop, heat supply system, HVAC system, illumination equipment and hot water supply to save energy and reduce emissions.Significance: Energy Saving Modification of existing building can dramatically reduce the energy consumption and prompt it to meet the related energy saving standards, including Energy Saving Modification of building envelope, heat supply system, HVAC system, illumination equipment and hot water supply. Consultation on Energy Saving Modification can focus...
发布时间: 2014 - 12 - 14
浏览次数:51
Criteria: Commissioning of building automation system is divided into two stages, simulation commissioning and system joint commissioning. Monomer debugging should be done after the installation of building automation system while the later needs to be installed under the following conditions, including completions of technical equipment and pipeline installation, facility machine room and pump room cleaned and closed that reaching the indoor sanitary condition. Building automation system joint debugging is conducted after every relevant facility of the system has been installed and debugged a...
发布时间: 2014 - 12 - 14
浏览次数:51
11页次2/3HomePrev123NextEnd
Copyright ©2005 - 2013 Shenzhen Junye Building Technology Co., Ltd
Address: Room A203, Podium Building, Shennan Garden No.11, Kexing Road, Nanshan District,  Shenzhen, Guangdong, PRC
 
传真:+86 0755-2788 8009
邮编:330520